QUALIMETER® 150N and 500 N - The Intelligent Quality Control Procedure
GABO QUALIMETER presents a new and modern testing system for quality control.
The QUALIMETER® is a cost-effective and “easy to use” testing instrument as accompanying tool for quality control. It is designed for compression tests at 10 Hz and room temperature. The QUALIMETER® determines the static and dynamic spring rate.
Our QUALIMETER® series consist of 2 testing instruments with maximum forces of 150 N and 500 N. The elementary and robust construction of this device type enables also the application under difficult installation conditions, for instants directly at the place of production.
Only one single drive provides the static and dynamic load on the sample. There is nothing easier and robust!
Optionally, visco-elastic data like E’, E’’, E*, tan delta and the shore hardness can be determined with the QUALIMETER®.
Fields of application:
- Technical rubber products
- Elastomer products and tires
Static and dynamic spring rates
Dynamic visco-elastic characterisation E’, E’’, E*, tan delta (Option)
Shore Hardness (Option) * Compression tests (quick test)
Preconditioning is optionally possible * Software is available in all national languages
Operation at ambient temperature
Test frequency 10 Hz
Easy to use
|Spezifikationen||QUALIMETER® 150||QUALIMETER® 500|
|Test specimen size:
|Static load drive||electrodynamic
|Dynamic load drive||electrodynamic|
|Static strain range||up to 3 mm / up to 6 mm (Option)
|Dynamic strain range||up to ±1.5 mm / up to ±6,0 mm (Option)
|strain or force controlled
|1300 mm x 1200 mm x 800 mm
For compression samples
On request, the QUALIMETER® can be extended with an Automatic Sample Supply System (ASSS), available with interchangeable magazines of maximum 50 samples, each.